Controls and Hardware for 
Road Race and Road Sport Riders

Email for price and applications not listed

CRG has developed the Street line of products to enhance the function and look of your street bike. Their high standards for materials and workmanship allow them to offer you the best mirrors on the market.

• Hindsight Bar End Mirror

• Hindsight Lane Split Bar End Mirror

• Blindsight Bar End Mirror

• Billet Internal Adapter

Call for our best price!

 
     The Hindsight Bar End Mirror is best functioning, highest quality motorcycle mirror you'll find anywhere.  We use custom convex glass formed to our own specification to give you the perfect balance between field of vision and image magnification. To reduce glare, the glass has an automotive quality mirror tinting. Rubber mounting helps the glass resist vibration. The lightweight but sturdy construction allows the Hindsight Mirror to be positioned for optimal viewing without concern of movement during high speed runs or excursions over rough roads.

• 6061-T6 Aluminum CNC Machined Billet Construction

• Black Anodized

• All stainless hardware

• Fully modular assembly; all parts are replaceable

• Extension elbow is reversible to allow for either left / right side use.

• Will fit most handlebar/clip-ons with an outer diameter of a 7/8” (requires10mm (3/8”) of bare bar out board of the grip/throttle assembly)

• Optional Billet internal Bar End Mirror Adapter Kit will allow internal mounting on virtually any handlebar/clip-on.

 
     The Hindsight LS (Lane Split) Bar End Mirror was created by adding the folding /retractable feature to the original Hindsight. There are two primary benefits of the retracting bar end mirror—added clearance during tight riding conditions, and reduced width for bike storage. Simply pull in the bezel of the mirror to create additional clearance, then fold the bezel back out against its positive stop in the full open position and the sighting of the mirror returns perfectly to its rear vision position. The detent folding mechanism is calibrated to retract should the mirror contact an immovable object, thus allowing forward motion without disruption of steering control. The pivot of the hinge features a ball / spring detent which holds the mirror bezel in the full open or full retracted positions. The pivot also features dust rings that provide for years of maintenance free operation.

The Hindsight LS is available as a complete assembly or can be purchased separately to retrofit an original Hindsight Mirror.

As with the original Hindsight we use custom convex glass formed to our own specification to give you the perfect balance between field of vision and image magnification. To reduce glare, the glass has an automotive quality mirror tinting. Rubber mounting helps the glass resist vibration. The lightweight but sturdy construction allows the Hindsight Mirror to be positioned for optimal viewing without concern of movement during high speed runs or excursions over rough roads.

• 6061-T6 Aluminum CNC Machined Billet Construction

• Black Anodized

• All stainless hardware

• Fully modular assembly; all parts are replaceable

• Extension elbow is reversible to allow for either left / right side use.

• Will fit most handlebar/clip-ons with an outer diameter of a 7/8” (requires10mm (3/8”) of bare bar out board of the grip/throttle assembly)

• Optional Billet internal Bar End Mirror Adapter Kit will allow internal mounting on virtually any handlebar/clip-on.

 
     The Blindsight Bar End Mirror is intended to be used in conjunction with a left side mounted Hindsight or stock mirrors. This little assembly will clean up any blind spots in your rear and side view. We use custom convex glass formed to our own specification to give you the perfect balance between field of vision and image magnification. To reduce glare, the glass has an automotive quality mirror tinting. Rubber mounting helps the glass resist vibration.

• 6061-T6 Aluminum CNC Machined Billet Construction

• Black Anodized

• All stainless hardware.

• Fully modular assembly; all parts are replaceable.

• Will fit most handlebar/clip-ons with an outer diameter of a 7/8” (requires10mm (3/8”) of bare bar out board of the grip/throttle assembly)

• Optional Billet internal Bar End Mirror Adapter Kit will allow internal mounting on virtually any handlebar/clip-on.

 
     This is the Billet Internal Adapter for the Hindsight, Hindsight LS and Blindsight Billet Bar End Mirrors. We make this assembly to offer an alternative to the basic Bar End Mirror mount.* This assembly will work on bars with internal diameters as small as 12mm (.475”) and as large as 19mm (.750”). This range covers virtually all aluminum and steel bars/clip-ons.
* Whenever possible we recommend mounting the Hindsight Billet Bar End Mirror with the basic mount which clamps to the outer diameter of a 7/8” handlebar/clip-on. Using the basic mount is the bar end mirror solution using the fewest parts, facilitates the easiest installation and removal, is the lightest weight, and provides for the most secure bar end mirror mounting. Use of the basic mount requires having 10mm (3/8”) of bare bar outboard of the grip/throttle assembly. Before purchasing the mirror adapter, try moving your grips and controls inboard (away from the end of the bar). In many applications, the mirror can be mounted with the basic mount.

• 6061-T6 Aluminum CNC Machined Billet Construction

• Black Anodized

• Application Range: Min. Bar I.D. 12mm (.475”)—Max. Bar I.D. 19mm (.750”)