The motorcycle race stand to own! Our stands are built in the U.S.A. of high-grade steel and zinc-plated to protect them from the elements. We are constantly looking for ways to improve our motorcycle race stands and other products. Satisfaction is 100% guaranteed, including a good fit for your sport bike.

Standard Rear Stand

• Fits virtually all chain (or belt) driven bikes with conventional swingarms except bikes with very low pipes.

• Width is adjustable to fit swingarm widths of 10.5 in to 14.0 in.

• We also have a narrow version for vintage and 125cc grand prix bikes.

• Rubber pads protect bottoms and sides of swingarm.

• Allows rear wheel cleaning and removal and chain oiling and adjusting.

• Note: Shim required for CBR 929 ($7.00)

Spooled Rear Stand

• Same as our standard rear but with spooled adapters to lift bikes with spool-equipped swingarms.
• Allows rear wheel cleaning and removal and chain oiling and adjusting.
• Note: Shim required for CBR 929 ($7.00)

• Same specifications as standard and spooled rear, but works equally well on both type swingarms.
• Note: Shim required for CBR 929 ($7.00)

Picture
Coming
Soon

 

• Same specifications as standard and spooled rear, but works with the inverted V-shaped peices on the bike

 

• Same specifications as standard and spooled rear, but works with the inverted V-shaped peices on the bike

  One Armed Forward Handle Rear stand

• Available in standard and spooled versions

• Fits virtually all chain (or belt) driven bikes with conventional swingarm.

• Width is adjustable to fit swingarm widths of 10.5 in to 14.0 in.

• Standard version has rubber pads to protect the bottom and sides of the swingarm.

• Allows rear wheel cleaning and removal and chain oiling and adjusting.

• Very simple, very strong.
• Available for:
  -Honda Hawk & VFR
  -Honda RC 30/45, NC 30/35
  -Honda RS250
  -Honda NSR250
  -Ducati 998/996/916/748, Monster S4R, Monster S2R, Multistrada 1000, M900E
  -Triumph -all single sided swingarm
  -MV Augusta F4.
• Allows rear wheel cleaning and removal and chain oiling and adjusting.

Retail $144.95
EMA - $132.00

  One Armed Rear stand -BMW K1200S/R

• Rear stand for 2005 BMW K1200S and K1200R with the new single-sided swingarm
• Allows rear wheel removal
• The forward handle layout lets you hold the left handlebar of the bike to operate. It is space-saving and leaves no trip hazard behind the bike. The ball bearing head allows you to spin the wheel while the bike is on the stand for easy wheel cleaning.

Retail $179.95
EMA - $165.00

  One Armed Rear stand -BMW R1200S

• Rear stand for BMW R1200S with the single-sided swingarm on the right side of the bike. 

• It allows rear wheel removal. The ball bearing head allows you to spin the wheel while the bike is on the stand for easy wheel cleaning.

Retail $164.95
EMA - $150.00

Picture
Coming
Soon

Reversible One-Armed Rear stand

• Value and versatility

• Available for:
  -Ducati 998/996/916/748, Monster S4R, Monster S2R, Multistrada 1000, M900E
  - Triumph -all single sided swingarm
  - MV Augusta F4.

• Allows sprocket work/sprocket removal

• Handle pushed to the rear on right side of bike

• Handle pushed forward on left side for conventional use

• Can be used as a conventional rear stand

• Allows wheel removal

• Both pins included in purchase price

Retail $179.95
EMA - $165.00

• Sized to fit all new sport bikes with no need to adjust.
• Forks rest on rubber pads so your bike will not get scratched.
• Allows front wheel cleaning and removal.

Retail $144.95
EMA - $132.00

• Converts Forklift Front to lift from steering stem for fork servicing/removal.
• May be permanently attached to Forklift Front.
• Package price for Forklift Front and Converter: $180.00  -MSRP $195.95.
• See Front Stand Fitting Chart for pin/adapter application.

Retail $74.95
EMA - $68.00

• Fits stock 996/916/748 (no hole through steering stem).
• Use with Forklift Front Stand to service forks.
• Replaceable Delrin pads cradle lower triple clamp without scratching clamp or fender.
• Package price for Forklift Front and Ducati Converter: $260.00  -MSRP $285.95.

Retail $164.95
EMA - $152.50

• Similar to our Forklift Front, this stand is tailored to fit the 2005 BMW K1200S & K1200R. 
• Allows front wheel cleaning and removal. 
• Use only with rear stand.

Retail $144.95
EMA - $132.00

• Same features as Standard Front Stand but easier to use and stores more compactly.
• Uses same lower chassis as our rear stands.
• This stand allows front wheel removal and cleaning and fork leg removal.
• See Front Stand Fitting Chart for pin/adapter application.

Retail $159.95
EMA - $144.00

• Our folding Tire Tree holds up to four wheels and has room to mount an electrical box for tire warmer use.
• Features heavy-duty wheels, collapsible design, and can be positioned upright or horizontally.
• When folded up, the Tire Tree is only 55"x26"x6", which is very convenient for storage, transport, and shipping.

Retail $324.95
EMA - $295.00

• Pit Bull Jack Stands allow your motorcycle to rest on the frame sliders and/or foot pegs to allow easy access for steering head or rear shock/swingarm maintenance. Simply lift your bike with a Pit Bull stand, place the Jack Stands under the appropriate resting point, adjust height and lower your bike onto the Jack Stands.
• Two sets (shown) can hold your entire bike up.

Retail $149.95 pr
EMA - $135.00 pr.

• Extra Heavy Duty
• Low Profile
• Saves Your Brake Rotors
• Can be Mounted for Quick Removal or Permanently
• Additional mounting hardware available for $3.95

Retail $49.95
EMA - $45.00

• The Axle Holder gives you a place to store your axle when it is removed from your motorcycle. 
• The Axle Holder can be mounted to either side of the stand and the angle is adjustable to suit your needs.
• Compatible with the New front Stand, Forklift Front Stand, Spooled Rear, Standard Rear and SS Rear.
• The inner part of the axle of the stand must extend approximately 1/2 inch from the inside of the upright tube

Retail $5.95
EMA - $5.00

• GP Top supports are available separately and work on existing Pit Bull Rear Stands.

Retail $29.95
EMA - $27.00

Picture
Coming
Soon

• SS Top supports are available separately and work on existing Pit Bull Rear Stands.

Retail $36.95
EMA - $33.00

• These top supports are tailored to fit Ducati 999s and 749s that do not accept spools. They are made to lift the bikes without interfering with axle removal.

Retail $25.95
EMA - $24.00

• We have 6, 8, 10 and 12mm spools.
• 6, 8 & 10 mm spools are aluminum and are provided with attach bolts. They come in a wide variety of bright colors as well as Delrin.
• 12mm spool kits include 8mm to 12mm adapters.
• See Spool Fitting Chart for applications.

Retail $16.95
EMA - $15.00

• Ribbed rubber design for extra grip. No glue required for installation.
• Set of 4

Retail $5.95
EMA - $5.00

• Works on Standard Rear, SS Rear and Forward Handle Standard Rear.
• Must be attached with adhesive.

Retail $5.95
EMA - $5.00

Replacement Ducati Delrin Pads

• Fits the Ducati lower triple clamp (patent pending).

Retail $45.95
EMA - $42.00