Ultra-Lap Receiver
- The Ultra-lap supports
true split times — multiple transmitters may be
placed around the track and intermediate times within
each lap will be recorded. Our transmitter has an
additional switch that selects between
"start/finish" and "split" — you
set up one transmitter in the start/finish mode and
any number of other transmitters around the track in
split mode. The Ultra-Lap can tell the difference
between the two because a different frequency of
infrared pulsing is used. The "start/finish"
frequency will still be compatible with AIM devices.
The "split" frequency will not trigger the
AIM devices.
- The Ultra-Lap receiver
enclosures (both the LCD head and the IR receiver) are
machined from billet aluminum. This provides superior
strength and durability, and prevents serious damage
to the electronics even in the most severe crashes.
- Simple consistent,
4-button user interface.
- Extra-large, bold lap
times are 0.6" (15mm) in height for easy
visibility
- Unique "auto
turn-on" feature — "turn it on and forget
it" — turn it on first thing on the morning of
a race day and never worry about missing a lap again.
The unit will auto turn-off but will automatically
turn back on when it crosses the transmitter beam.
- Records ambient
temperature for each session.
- Displays average lap
time for each session, as well as best and worst lap
time.
- Auto power-down for
extended battery life.
- At the end of a lap, a
flashing green or red light indicates a faster or
slower lap than the previous.
- Accurate to 1/100
second per lap.
- Store approximately
2,000 laps/split times — for many, a full season of
racing.
- Each stored lap
contains the following information:
- Time of the lap,
accurate to 1/100 second.
- Date and time of
the lap.
- The track (or
other identification) of the lap.
- A unique session
identifier (to differentiate each race or practice
session).
- An indication if
was the best lap of that session.
- Extensive
customization via easy-to-use English menus:
- Laps per
race/session: 1-99 or do not count (lap countdown).
- Minimum lap time:
1-250 seconds.
- Lap hold time
(time the lap display is frozen at the end of a
lap): 1-250 seconds.
- Display
contrast/brightness setting: 31 levels.
- Enter name of
track or other identification (stored with each
lap): up to 12 characters.
- Option to display,
at end of race, the first lap of session, the last
lap of session or the fastest lap of session.
- Enable or disable
the green/red flashing LED.
- Auto turn-off
time: 1-30 minutes.
- Enable or disable
the auto-turn-on feature.
- Easily set the
current date and time.
- Enter 1 or 2 lines
of personalization information: up to 20
characters per line.
- Quick deletion of
all stored laps.
- Device reset to
factory settings.
- Device can be personalized
with 2 lines of data: e.g.,
-
PROPERTY OF
BILL SMITH
This information shows up on the main screen so if the
unit is misplaced, its owner can be identified
- Main screen shows date
and time
- Main screen has a
battery level indicator that shows when the batteries
need to be replaced
- Uses 1 readily-available
inexpensive AA battery
- Ability to download
all lap data to a PC using the optional download
module. Includes software to organize, store
and graph lap data.
|
Ultra-Lap
receiver only
|
|
Model |
Cable
length |
MSRP |
Cost |
|
UL-501-2 |
2-foot |
$199.00 |
$174.00 |
| UL-501-6 |
6-foot |
$199.00 |
$174.00 |
| UL-501-8 |
8-foot |
$199.00 |
$174.00 |
| UL-501-10 |
10-foot |
$199.00 |
$174.00 |
|
| |
|
Ultra-Lap
receiver & transmitter
|
|
Model |
Cable
length |
MSRP |
Cost |
|
UL-502-2 |
2-foot |
$244.00 |
$213.00 |
| UL-502-6 |
6-foot |
$244.00 |
$213.00 |
| UL-502-8 |
8-foot |
$244.00 |
$213.00 |
| UL-502-10 |
10-foot |
$244.00 |
$213.00 |
|
| |
|
Ultra-Lap
receiver & transmitter & download module
|
|
Model |
Cable
length |
MSRP |
Cost |
|
UL-503-2 |
2-foot |
$284.00 |
$248.00 |
| UL-503-6 |
6-foot |
$284.00 |
$248.00 |
| UL-503-8 |
8-foot |
$284.00 |
$248.00 |
| UL-503-10 |
10-foot |
$284.00 |
$248.00 |
|
| |
| Ultra-Lap
replacement cables |
| UL-701-2 |
2-foot |
|
$15.00 |
| UL-701-6 |
6-foot |
|
$15.00 |
| UL-701-8 |
8-foot |
|
$15.00 |
| UL-701-10 |
10-foot |
|
$15.00 |
|
Ultra-Lap Transmitter
-
Bright
blue for easy visibility.
-
Extra
powerful transmissions with 8 infrared LEDs. Runs on
either 4 internal AA batteries (not included) or an
external 12V lead-acid battery for extra long life and
extra power.
-
6'
external power cable (included) with alligator clips
for quick and easy connection to a lead-acid battery.
-
Low
battery indicator — blinks green when batteries are
good, red when batteries are low.
- Multiple transmitters may be placed around the
track and intermediate times within each lap will be
recorded. Our transmitter has an additional switch
that selects between "start/finish" and
"split" — you set up one transmitter in
the start/finish mode and any number of other
transmitters around the track in split mode.
XT-401
- $59.00
Ultra-Lap
Download Module
The
Ultra-Lap download module enables you to download all of
the lap data from the Ultra-Lap to a Windows PC. The
included software performs the following functions:
-
Download
lap and track information to the PC.
-
Displays
all data in a spreadsheet grid.
-
Allows
editing of all lap information.
-
Graphs
up to 5 sets of laps.
-
Print
the data grid or graph.
-
Exports
the data to a format compatible with Excel and other
spreadsheet programs.
-
Requirements:
XT-402
- $54.00
|
